Monitor Network Traffic with vnStat on Ubuntu 20.04

vnStat is an open-source and lightweight network traffic monitor for Linux operating systems. vnStat quietly monitors the network traffic for specific interfaces and stores the monitoring data in a database. With vnStat, you can view the bandwidth usage per hour, day, month, or for a particular period.

In this guide, we will be looking at how to install vnStat and monitor network traffic on Ubuntu OS.

Note: The procedure described here has been tested on Ubuntu 20.04 LTS. The commands have been executed on Terminal which you can open through the Ctrl+Alt+T shortcut.

Installing vnStat

VnStat is available in the default Ubuntu repositories but it is not the latest version. To install vnStat latest version, follow the below-mentioned steps:

Step 1: Update repository index

First, execute the below command to update the system repository index:

$ sudo apt update

Enter the password for sudo.

Step 2: Install prerequisites

Next, you will have to install some prerequisites that can build software from source. We will need it for the compilation of vnStat. Execute this command to install the prerequisites:

$ sudo apt install build-essential gcc make libsqlite3-dev -y

Step 3: Download vnStat tar.gz package

Now from the vnStat official website, download the latest version of vnStat tar.gz package. Currently, the latest version of vnStat is 2.6, so we can download it as follows:

$ wget https://humdi.net/vnstat/vnstat-2.6.tar.gz

Step 4: Install vnStat

Once the tar.gz package is downloaded, we can install it as follows:

First, extract the tar.gz using the below command in Terminal:

$ tar -xvzf vnstat-2.6.tar.gz

Then switch to the resulting extracted directory using the below command:

$ cd vnstat-2.6

Now configure it using the command below:

$ ./configure --prefix=/usr --sysconfdir=/etc

Then, install vnStat as follows:

$ sudo make
$ sudo make install

Step 5: Verify Installation

To verify if vnStat has been successfully installed, execute the below command in Terminal:

$ vnstat -v

The following output confirms vnStat version 2.6 has been installed.

Step 6: Enable and start vnStat service

To enable and start vnStat service, first you will need to copy vnStat service file from the vnStat extracted directory to the /etc/systemd/system/ using the below command:

$ sudo cp -v vnstat-2.6/examples/systemd/vnstat.service /etc/systemd/system/

Now enable vnStat service using the below command:

$ sudo systemctl enable vnstat

Then to start vnStat service, execute the below command

$ sudo systemctl start vnstat

To verify if vnStat service is running, execute the below command:

$ sudo systemctl status vnstat

The following output confirms vnStat service is running properly without any issues.

Monitor Network Traffic with vnStat

vnStat supports various options that help you to monitor traffic in different ways. You can view some of the available options by executing the below command in Terminal:

$ vnstat --help

Or execute the following command to view the complete list of options:

$ vnstat --longhelp

You can also visit vnStat man page for the complete list of options.

Running the vnStat command without any option prints the bandwidth usage statistics for all the available interfaces.

$ vnstat

Here is the output of vnStat command on our system which is showing statistics of one interface as this is the only available interface on our system.

You can also monitor a specific interface by using the -i option followed by the interface name.

$ vnstat -i <interface_name>

For instance, to monitor an interface ens33, the command would be:

$ vnstat -i ens33

You can also monitor bandwidth usage as per hourly, daily, monthly, and yearly usage using the -h, -d, -m, and -y options respectively. For example, to find the daily bandwidth usage, the command would be:

$ vnstat -d

You can also get the bandwidth usage for the top traffic days. For instance, to find the top 10 bandwidth usage days, use -t option followed by the number of days:

$ vnstat -t 10

To monitor bandwidth usage in real-time, use the -l option as follows:

$ vnstat -l

If you want to remove all the statistics for a specific interface from the database and stop monitoring it, use the below command syntax:

$ sudo vnstat --remove -i <interface_name> --force

For instance, to remove the interface ens33 from the database and stop monitoring it, the command would be:

$ sudo vnstat --remove -i ens33 --force

To add this interface again for monitoring, use the below command:

$ sudo vnstat --add -i ens33

After adding the interface, restart vnStat service:

$ sudo systemctl restart vnstat

vnStat is a handy tool to keep an eye on the bandwidth usage on your Linux OS. In this guide, you have learned how to install and use this tool on Ubuntu 20.04 LTS for monitoring the traffic on network interfaces.

from Linux Hint https://ift.tt/3vfvcPz