ffprobe Linux Command Example Usage

“The ffprobe is a Linux command used to retrieve information from multimedia files. The command then displays the output in a machine or human-readable format. With ffprobe, you can gather information, such as the size, bit rate, height, width, codecs, and pixel format of the multimedia stream. Ffprobe is a must-have tool in your video processing toolkit.

You can use ffprobe as a standalone application or with a different textual filter to perform advanced processing, such as plotting and statistical processing.

You can use ffprobe with different options. In this article, you will learn some of the common usage examples of the ffprobe to enhance your video analysis and information extraction skills. Let’s get started!”

Getting Started With ffprobe

You can install ffprobe using the package manager on your Linux. You need to install ffmpeg, which in turn installs the ffprobe using the command below:

$ sudo apt-get install ffmpeg


To verify the installation, type the ffmpeg command on the terminal. It should display the configuration and version of the installed ffmpeg.

Basic Usage Examples of ffprobe

1. Get File Properties

You can use the ffprobe with the multimedia file to retrieve all its details. In this example, we will use a downloaded video, samplevid.mp4, located in our Videos directory.

The command will be:

$ ffprobe samplevid.mp4

The displayed output is:

You can notice that the output has too much “noise”. You can filter the information and hide the banner to only display the needed information using the -hide_banner option

$ ffprobe -hide_banner samplevid.mp4

The output without the banner will look like the one below.

Key details from the output include:

  • Our samplevid.mp4 is using the format “mov,mp4,m4a,3gp,3g2,mj2”.
  • You can also see the date and time the file was created, 2020-09-12.
  • The duration represents the length of the video file and its corresponding bitrate of 234 kb/s
  • We can also note that the multimedia file has two streams, video and audio.

2. ffprobe Stream Specifiers

Most multimedia files contain audio and video streams, and some even in multiple languages. Using the ffprobe, you can choose only to inspect a specific stream.

When you print the output of the video file, it displays the two streams. Stream #0:0 represents the video stream, and Stream #0:1 represents the audio stream.

In ffprobe, to specify which stream to use, the select_streams option is added. Use ‘v’ or ‘V’ to choose a video and ‘a’ to choose audio. For the subtitle, use ‘s’.

In our case, to inspect the audio stream and get its bit rate, use the command:

$ ffprobe -hide_banner -v panic -select_streams a:0 -show_entries stream=bit_rate samplevid.mp4

The -v panic or -v error help to reduce the displayed output.

To inspect the video stream, replace the a with v as shown below:

$ ffprobe -hide_banner -v panic -select_streams v:0 -show_entries stream=bit_rate samplevid.mp4

3. Hide the [STREAM] and [/STREAM] in Stream Specifiers

To get rid of the annoying wrappers surrounding the results of the stream specifiers, you need to add –of noprint_wrappers=1

The previous command to display the audio stream can be rewritten as:

$ ffprobe -hide_banner -v panic -select_streams a:0 -show_entries stream=bit_rate -of default=noprint_wrappers=1 samplevid.mp4

The new output will be:

4. Get Information for Each Stream

If you need to access information of all the streams of the given multimedia file, use the -show_streams specifier.

$ ffprobe -hide_banner -v panic -select_streams v:0 -show_streams samplevid.mp4

You can view many details from the output, including size, profile, pixel format, bitrate, frame rate, height, etc.

5. Get Details of the Container Format

To get the details of the container-format, use the -show_format

$ ffprobe -hide_banner -v panic -select_streams v:0 -show_format samplevid.mp4

The details of the container, including the bitrate, size, and tags, will be displayed as shown:

6. Get Information on Each Packet

For a video file, you can get the details of every packet using the -show_packets specifier.

$ ffprobe -hide_banner -v panic -select_streams v:0 -show_packets samplevid.mp4

The output displays size, duration, and convergence details, enclosed between the [PACKET] [/PACKET].

7. Get Details of Each Frame

A video has many frames, and we can extract the information of the frames, such as height, picture type, timestamps, and color space, using the show_frames. The frame has tons of information, but they are helpful.

$ ffprobe -hide_banner -v panic -select_streams v:0 -show_frames samplevid.mp4

The output of each frame will get enclosed within the [FRAME] and [/FRAME]

8. ffprobe Output Format

Luckily, ffprobe allows you to choose the desired output format, such as CSV, JSON, and XML formats, using the -print_format <format>

We can easily choose which format to display the output using the above examples. For instance, to show the format of the container in different formats, see the examples below.

To Use CSV:

$ ffprobe -hide_banner -v panic -select_streams v:0 -print_format csv -show_format samplevid.mp4

To use JSON:

$ ffprobe -hide_banner -v panic -select_streams v:0 -print_format json -show_format samplevid.mp4

To use XML:

$ ffprobe -hide_banner -v panic -select_streams v:0 -print_format xml -show_format samplevid.mp4

To use ini:

$ ffprobe -hide_banner -v panic -select_streams v:0 -print_format ini -show_format samplevid.mp4

9. Extracting Specific Details From Streams

With ffprobe, it’s possible to fetch specific details such as width, height, PTS (Picture Timestamp), duration, etc.

To get the bitrate

The video’s bitrate can be extracted using the stream=bit_rate specifier. In this case, we will print in JSON format.

$ ffprobe -hide_banner -v panic -select_streams v:0 -print_format json -show_entries stream=bit_rate samplevid.mp4

To get the picture type

Each frame has a different picture type. You can display the picture type in any format using the frame=pict_type specifier. We will show the picture type in a flat format using the command below.

$ ffprobe -hide_banner -v panic -select_streams v:0 -print_format flat -show_entries frame=pict_type samplevid.mp4

To get the duration of the video

For this, use the stream=duration specifier as below to get the duration in JSON.

$ ffprobe -hide_banner -v panic -select_streams v:0 -print_format json -show_entries stream=duration samplevid.mp4

To get the Width and Height

Using ffprobe, you can extract the width and height of the video in any format as shown.

Use the stream=width,height specifier.

$ ffprobe -hide_banner -v panic -select_streams v:0 -print_format json -show_entries stream=width,height samplevid.mp4

To get the PTS

The packet=pts_time specifier will get all the PTS of all packets.

$ ffprobe -hide_banner -v panic -select_streams v:0 -print_format flat -show_entries packet=pts_time samplevid.mp4

Conclusion

The ffprobe is a powerful Linux utility tool, and what we’ve covered here is just a scratch of the surface. There are plenty of specifiers you can combine with ffprobe to achieve functionality. However, we’ve touched the common once, but you can check the ffprobe documentation to understand it more. Have fun with ffprobe!



from https://ift.tt/y3kRgdO

Post a Comment

0 Comments