Prerequisites
If you want to try out the examples in this article, you must:
1) Have Ansible installed on your computer.
2) Have an Ubuntu host configured for Ansible automation.
There are many articles on LinuxHint dedicated to installing Ansible and configuring hosts for Ansible automation. You may check these articles out if necessary.
Setting Up a Project Directory
Before moving on any further, set up a new Ansible project directory, just to keep things a bit organized.
To create the project directory register-demo/ and all the required subdirectories (in your current working directory), run the following command:
Once the project directory is created, navigate to the project directory, as follows:
Create a hosts inventory file, as follows:
Add the host IP or DNS name of your Ubuntu host in the inventory file (one host per line), as shown in the screenshot below.
Here, I have added my Ubuntu 20.04 LTS host vm3.nodekite.com in the ubuntu20 group.
Once you are done, save the file by pressing <Ctrl> + X, followed by Y and <Enter>.
Create an Ansible configuration file ansible.cfg in your project directory, as follows:
Next, type the following lines in the ansible.cfg file:
inventory = hosts
host_key_checking = False
Once you are done, save the ansible.cfg file by pressing <Ctrl> + X, followed by Y and <Enter>.
Now, try to ping your Ubuntu host, as follows:
As you can see, my Ubuntu 20.04 host vm3.nodekite.com is accessible.
Example 1: The Basics
In this example, I will show you some of the basics of the Ansible register module. I will use Ansible to generate a random password in my Ubuntu 20.04 host using the pwgen command, store the password in a variable using the register module, and print the password on the screen.
First, create the new playbook generate_pass.yaml in the playbooks/ directory, as follows:
Type the following lines in the generate_pass.yaml file:
user: ansible
become: True
tasks:
- name: Ensure pwgen is installed
apt:
name: pwgen
state: present
update_cache: True
- name: Generate password
shell: pwgen -N 1 -s 30
register: mypass
- name: Print the generated password
debug:
msg: "The password is "
Once you are done, press <Ctrl> + X, followed by Y and <Enter>, to save the generate_pass.yaml file.
The following line tells Ansible to run the playbook generate_pass.yaml on every host in the ubuntu20 group. In my case, the playbook will be run on the host vm3.nodekite.com.
In this playbook, I will define three tasks.
The first task will enure that the pwgen package is installed.
The second task will generate a random, 30-character password using the pwgen command. I will use the register module to store the generated password in the mypass variable.
The third task will print the mypass variable using the Ansible debug module.
Run the playbook generate_pass.yaml using the following command:
As you can see, the playbook ran successfully. A password has also been generated.
But, why did the variable mypass print so many items?
Well, the variable mypass is an object that contains some important properties.
The most important properties of each of the register variables are as follows:
cmd – The command that ran to generate the output.
stdout – The output of the command.
stderr – The error output of the command.
start – The date and time when the command began executing.
end – The date and time when the command finished executing.
delta – The time taken to run the command. This is the difference between the end and the start properties.
stdout_lines – An array containing each output line of the command. Same as stdout, but stdout separates the lines using a newline (\n) characters instead of arrays.
stderr_lines – An array containing each error output line of the command. Same as stderr, but stderr separates the lines using newlines (\n) characters instead of arrays.
If you just want to print/access the password string (which is very likely), you may print/access the stdout property of the mypass variable in your playbook, as marked in the screenshot below.
Once you are done, run the playbook generate_pass.yaml again. Only the password string will be printed, as you can see in the screenshot below.
That covers the basics of the Ansible register module.
Example 2: Store Directory Contents
In this example, I will show you how to store the contents of a directory in a variable using the Ansible register module, as well as how to iterate over them.
First, create the new playbook get_dir_contents.yaml in the playbooks/ directory.
Next, type the following lines in the get_dir_contents.yaml playbook:
user: ansible
become: True
tasks:
- name: List all files and directories in /home/ansible
shell: ls /home/ansible
register: dir_contents
- name: Print directory contents using loops
debug:
msg: ""
loop: ""
Once you are done, press <Ctrl> + X, followed by Y and <Enter>, to save the generate_pass.yaml file.
In this playbook, I will define two tasks.
The first task lists all the contents of the /home/ansible directory and stores them in the dir_contents variable.
The second task prints the dir_contents variable.
Run the get_dir_contents.yaml playbook, as follows.
As you can see, the stdout_lines property stored the directory contents as an array. The stdout property is also stored in the directory contents. These properties are separated by newline (\n) characters. In this example, the stdout_lines property is easy to work with.
Next, iterate over the directory contents using a loop.
To do this, open the get_dir_contents.yaml playbook and change the second task, as marked in the screenshot below.
Here, I am iterating over the dir_contents.stdout_lines array using a loop and printing the array items using the Ansible debug module. In this task, the item variable is a loop variable used to iterate over the array elements.
Run the get_dir_contents.yaml playbook, as follows:
As you can see, the contents of the /home/ansible directory are printed on the screen.
Example 3: Back Up Directory
In this example, I will show you how to back up a directory using the Ansible register, file, and copy modules.
First, create the new playbook backup_home_dir.yaml in the playbooks/ directory, as follows:
Next, type the following lines in the backup_home_dir.yaml file.
user: ansible
become: True
tasks:
- name: Get home directory /home/ansible contents
shell: ls /home/ansible
register: dir_contents
- name: Create a new directory /tmp/ansible
file:
path: /tmp/ansible
state: directory
- name: Backup home directory /home/ansible to /tmp/ansible
copy:
src: /home/ansible/{{ item }}
dest: /tmp/ansible/
remote_src: True
loop: "
Once you are done, press <Ctrl> + X, followed by Y and <Enter>, to save the backup_home_dir.yaml file.
In this playbook, I will define three tasks.
The first task stores the contents of the /home/ansible directory (the directory I will be backing up) in the dir_contents variable using the Ansible register module.
The second task creates a new directory /tmp/ansible using the Ansible file module. This is the directory where the backup will be stored.
The third task loops through the dir_contents.stdout_lines array and uses the Ansible copy module to copy each directory to the /tmp/ansible/ directory.
Run the backup_home_dir.yaml playbook, as follows:
As you can see, on my Ubuntu 20.04 LTS host, the backup was successful.
Example 4: Run or Skip Tasks
In this example, I will show you how to run or skip tasks, depending on the variable you have registered, using the register module.
First, create the new playbook register_conditions.yaml in the playbooks/ directory as follows:
Next, type the following lines in the register_conditions.yaml file.
user: ansible
become: True
tasks:
- name: List directory contents
shell: ls /home/ansible/test3
register: dir_contents
- name: Check if directory is empty
debug:
msg: "Directory is empty."
when: dir_contents.stdout == ""
Once you are done, press <Ctrl> + X, followed by Y and <Enter>, to save the register_conditions.yaml file.
In this playbook, I have defined two tasks.
The first task stores the contents of the /home/ansible/test3 directory in the dir_contents variable.
The second task checks if dir_contents.stdout is an empty string, or whether the directory /home/ansible/test3 is empty. If the directory is empty, the message Directory is empty will print.
Run the register_conditions.yaml playbook, as follows:
As you can see, the playbook ran successfully.
Since the directory /home/ansible/test3 is empty, the playbook printed the message Directory is empty.
Next, create a new file in the /home/ansible/test3 directory.
Since the /home/ansible/test3 directory is no longer empty, the task Check if directory is empty is skipped, as you can see in the screenshot below.
Conclusion
The Ansible register module is very useful for server automation. This article showed you the basics of the register module, including examples of using the Ansible register module for directory storage and backup, and for running directory tasks.
from Linux Hint https://ift.tt/2AMtga5
0 Comments